PowerBook G4 Titanium DVI Keyboard Replacement

ID: 85

Description: Replacing this keyboard is easy and takes only...

Steps:

1. Locate the battery release tab on the underside of the G4.
2. Slide the battery release tab to the left and lift the battery out of the computer.

3. Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.
4. Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

5. Rest the keyboard face down on the trackpad area.
6. Disconnect the keyboard connector from the logic board.

7. Your laptop should look approximately like this.