Dell Inspiron 8600 Upper Case Replacement

ID: 5315

Description: We will show you how to remove the display...

Steps:

1. Remove the battery from the bottom left of the laptop as shown.
2. Remove the battery before operating on the computer to avoid electrocution.

3. Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.
4. You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.
5. Be careful of the wire attached to the underside of the hinge cover.

6. Pull the small black tab on the right hand side of the laptop.
7. You have now removed the hinge cover.

8. Using the Phillips #1 remove the screws at the top of the keyboard as indicated.
9. Do not just lift up. There is a tab underneath the keyboard that is still connected to the mother board.
10. You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
11. The keyboard should be easily removable at this point.

12. Flip the laptop over and remove the indicated screws.
13. Flip the laptop back over.
14. Find the two places where the display module is attached to the base of the computer.

15. Disconnect the video card from the display module by gently lifting upwards on the black tab.

16. Lift the display module directly upwards from the base of the computer.

17. Now remove the display module.

18. Remove the two screws that hold the upper case.
19. You can now pop up the upper case and replace.