Leica Z2X Tripod Socket Replacement

ID: 5311

Description: USe this guide to replace the tripod socket.

Steps:

  1. Carefully unscrew the four Phillips #0 screws on the bottom of the camera.
  2. There is a screw located inside of the tripod hole (large circle.) Make sure the screw is removed from there too!
    3. Step image
  3. Open the back door on the camera by pushing down on the door latch.
    4. Step image
  4. Apply pressure to the bottom plate and it will pop off.
  5. From here, you can replace the bottom plate, or continue on to further steps.
    6. Step image
Back