Starbucks Barista Ready Light Replacement

ID: 5070

Description: The ready light is a simple LED that shows when...

Steps:

  1. Unscrew the 6 screws from the back panel.
  2. Remove the back panel.
    3. Step image Step image
  3. Locate the ready light.
  4. Gently push the fixture against the Barista wall.
  5. Pull the fixture straight up to release it.
  6. Note: The fixture works as a spring.
  7. Note: The green cover from the front panel will "pop" off. Do not lose the green cover.
  8. Disconnect the wire lead connectors.
  9. Remove the ready light unit (fixture).
    10. Step image Step image Step image
  10. Replace the old LED with a new LED.
  11. To put back, match the green cover to the slot of the LED fixture, then slide the fixture down against the barista wall.
    12. Step image
Back