Handspring Visor Edge Back Panel Replacement

ID: 5022

Description:

Steps:

1. Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

2. Remove the gray back plate from the PDA.

3. Remove the four 2.6 mm Philips screws that are on the sides of the frame.
4. Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

5. Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

6. Gently remove the white frame from the back of the PDA.