Sony Cyber-shot DSC-P52 Outer Case Replacement

ID: 5021

Description: This guide is used for taking apart the case to...

Steps:

1. Open the battery compartment and remove the batteries.
2. Remove all of the visible screws on the outside of the case.
3. There should be three of them that are all easily located.

4. Open the memory card compartment.
5. Remove the screw next to the memory card slot.

6. Pull apart the front and back cover pieces carefully.
7. The front cover should come completely free with little effort.
8. The back cover will still be attached to the circuit board.

9. Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.
10. The circuitry will still be connected to the back case by ribbon cables.

11. Open the case as shown.

12. Unclip the clip holding the ribbon cable in.
13. Other ribbon cables might not have a clips.

14. Pull the ribbon cable out.