Nokia 6108 Teardown

ID: 5016

Description: I'm going to open my old Nokia phone to have a...

Steps:

1. Hello,I'm going to open my phone for some fun.
2. Be careful not to drop any screws or parts when you're opening your phone.This may render your phone not usuable.Open your phone at your own risk.

3. Remove the following parts.
4. Battery cover
5. Battery
6. SIM card
7. Remove two trox screws marked in figure 2.

8. Remove the front panel by pulling it or using an
9. I don't have a opening tool.So I used a flathead screw driver instead.
10. Be careful not the damage the number pad connector(highlighted in red).If you break it.You'll have to replace the entre front panel.

11. Remove 5 trox screws that are holding the screen and the touch pad.

12. After removing the touch pad and the screen.You can remove the logic board from the case.
13. The board seem don't want to leave its cozy home.

14. Let's start removing the parts under the logic board.
15. Parts need to be removed.
16. A motor
17. Charger connector
18. A speaker

19. Removing the EMI shield.Pry around the edge of the shield to remove it.

20. Nothing under the EMI shield.
21. I think we should stop here right now.There are pictures for all parts.