Palm Zire 31 Case Replacement

ID: 4967

Description:

Steps:

  1. Unscrew the two 7.35mm Torx T6 screws.
    2. Step image
  2. Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
    3. Step image
  3. Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.
    4. Step image
  4. Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.
    5. Step image
Back