Sega Genesis Reset Button Repair

ID: 3769

Description: We all know that the Sega Genesis brought to us...

Steps:

1. Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

2. Flip the Sega Genesis upright.

3. Gently lift the top casing.
4. Note: the case will be connected to the main board by LED wires.

5. Bend out the LED leads into vertical positions.

6. Slide the LED wire apparatus off the lead pins.
7. Note: observe which color wire corresponds with which length of pin.

8. Separate the main board from the outer case.

9. Using Philips screwdriver, remove 11 screws securing silver casing.

10. Remove silver case.

11. Locate reset button on motherboard

12. Place three pieces of 1cm x 1cm masking tape over reset button.