Sega Genesis Outer Case Replacement

ID: 3753

Description: This repair guide will take you through all the...

Steps:

1. Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

2. Flip the Sega Genesis upright.

3. Gently lift the top casing.
4. Note: the case will be connected to the main board by LED wires.

5. Bend out the LED leads into vertical positions.

6. Slide the LED wire apparatus off the lead pins.
7. Note: observe which color wire corresponds with which length of pin.

8. Separate the main board from the outer case.