Panasonic Lumix DMC-FX01 Rear Casing Replacement

ID: 3752

Description: Directions are given as if you were holding the...

Steps:

1. Locate the memory card and battery card latch on the bottom of the camera.
2. Slide the latch to the open position.

3. Open the battery latch, and slide the battery release lever to the right.

4. Remove the battery from the camera.

5. Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.

6. Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.

7. Remove the left side casing.

8. Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.

9. Remove the bottom right panel.

10. Gently remove the back casing.
11. Start at the bottom and carefully pry towards the top to get this piece free.