Olympus Stylus 410 Slider Replacement

ID: 2474

Description: If the front slider on the camera is cracked or...

Steps:

1. Locate the 2 screws on the bottom of the slider.
2. Remove both screws with a #00 Phillips screwdriver.

3. Gently pull on the bottom of the slider until it comes off the lower track.
4. There is a little piece that connects the slider to the track. Be sure not to lose this as it is needed to put the slider back on.

5. Lift the slider up until it comes off the upper track.

6. The slider should now be free from the body of the camera.