Kodak EasyShare C713 Outer Case Replacement

ID: 2409

Description: Use this guide to remove and replace front and...

Steps:

1. Use your finger tip to slide battery cover door away from the center of the camera.
2. The battery door should spring open.
3. If this does not happen, gently open the door lifting from the outer bottom side of the camera.

4. Remove the old batteries.

5. Remove the seven screws from the outer case with a Phillips #00.
6. All screws are 4.45mm.
7. There are 2 screws on the port side.
8. There are 2 screws on starboard side.
9. There are 3 screws on the bottom.

10. Make sure the battery cap is "up".
11. Pull the outer case off with your hands.