Nintendo DS Back Panel Replacement

ID: 1300

Description: Removing the back panel is simple, provided you...

Steps:

  1. Remove the cartridge from the console.
  2. Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.
  3. Remove the battery door.
  4. In the images, it shows that the fixer is using a flathead screwdriver. This flathead screwdriver will work just like the Phillips #00 Screwdriver.
    5. Step image Step image Step image
  5. Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic opening tool or spudger isn't available, your fingernails may work.
    6. Step image
  6. Remove the battery from the Nintendo DS.
    7. Step image
  7. Remove the seven 6.4mm Y00 screws located on the back.
  8. If your DS has a lanyard attached to it, you can remove it to make the process of opening the top-left screw easier.
    9. Step image
  9. With your hands, pry the back panel off the main case.
  10. Separate the back from the front, and set it aside.
    11. Step image Step image Step image
Back